|
Use General > Write to Card/Machine to write (save) design to BERNINA design card or BERNINA embroidery machine. |
|
Use Manage Designs > Stitch Selected Design to My Machine to send the selected designs in the Embroidery Library to currently selected machine for stitching. |
The software supports various machine models. Some can be connected by cable directly to your PC via the USB port. Older-style machines do not support direct connection but they do read ATA PC cards and/or USB memory sticks. Use Write to Card/Machine to send a design directly to your BERNINA embroidery machine ready to stitch.
If you intend to stitch designs only when the machine is connected to your computer, store them on your PC hard disk. However, you can also use the Write to Card/Machine command to save designs for later use, independent of your PC. Designs from any storage device – embroidery machine, design card, or USB memory stick – can then be stitched out as many times as you like. This eliminates the need for the PC to be connected to the machine during stitchout.
Tip When working with designs that are larger than the available physical hoop, you can split them into parts, each containing an object or group of objects. The software automatically calculates which files are to be sent and shows you how they will look.
