Device selection

Whether outputting designs or reading designs, you interact with devices via the Device Selection dialog.

DeviceSelectionUSB.png

 

If you plug a USB stick into your PC, you will see four enabled icons shown above. The other two buttons are enabled once you connect to machine. The dialog is the interface to the following functions.

Device

Description

EXP.png 

Use this to:

  • Write designs in EXP format to USB stick

  • Read designs EXP designs from USB stick.

Needle.png 

Use this to load the design to machine ready for stitching.

Machine.png 

Use this to:

  • Write design to machine, or USB stick plugged into machine

  • Read designs from machine, or USB stick plugged into machine.

Deco.png 

Use this to:

  • Write EXP design to memory card for deco 330/bernette 340 deco, or USB stick for bernette 340 deco

  • Read EXP design from memory card for deco 330/bernette 340 deco, or USB stick for bernette 340 deco.

COM.png 

Use this to:

  • Write EXP design to artista 165 to artista 185 or serial Reader/Writer Box

  • Read EXP from artista 165 to artista 185 or serial Reader/Writer Box.

ART.png 

Use this to:

  • Write design in artista 200/730(ART V4) format to USB stick

  • Read artista 200/730(ART V4) design from USB stick.

Related topics