BERNINA Embroidery Software 9 supports TWAIN-compatible scanners.
Note Some scanners will not work with BERNINA V9 because they require their own scanner software. If this is the case with your scanner, use your scanner software for scanning, save the image to your hard drive, then load the image into BERNINA V9.
1Connect the scanner using the accompanying instructions.
2Set it up in MS Windows® using the accompanying instructions and/or the Microsoft MS Windows® documentation.
3Start BERNINA Embroidery Software 9.
4Select Settings > Scanner Setup. The Select Source dialog opens displaying a list of scanner drivers loaded on your computer.
5Select the scanning driver to use, then click Select.
If you have trouble with scanning after re-starting BERNINA Embroidery Software 9, there may be a conflict with previously installed scanner drivers. Re-install BERNINA V9 and test the scanner. If the selected scanner driver does not work in BERNINA V9, select another scanner driver from the list. There are usually two installed for each scanner.
